LOUTOC Projector Lamp Bulb V13H010L67 for Epson ELPLP67 EX5210 EX7210 EX3210 EX3212 VS210 VS220 X12 W12 S12 PowerLite Home Cinema 500 707 710HD 750HD

Add your review

£81.99

£81.99

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Price: £81.99
(as of Feb 03,2021 22:51:25 UTC – Details)


Product Description

LOUTOC Projector Lamp Bulb V13H010L67 for Epson ELPLP67 EX5210 EX7210 EX3210 EX3212 VS210 VS220 X12 W12 S12 PowerLite Home Cinema 500 707 710HD 750HD

Parameter:

100% new replacement projector lamp bulb with same functioning as your origin.
Same brightness and durable lamp wick as the original bulb.
Outputting high definition pictures as you are expecting.
All our projector lamps have taken strict quality checks for beam performance, connections, voltages, and run-time, so you can trust it to work flawlessly in your projection.
Perfect match and compatibility for your projector. Applicable for EPSON EB-S02/EB-S02H/EH-TW480/EB-X12/EB-X11/EB-X02/EB-S01/EB-S100/EB-S11/EB-S110/EB-S11H/EB-S12/EB-SXW11/EB-SXW12/EB-W01/EB-W02/EB-W110/EB-W12/EB-W16/EB-W16SK/EB-X11H/EB-X14/EB-X14H/EB-X15/EH-TW510/EH-TW550; For EPSON EX3210/EX3212/EX5210/EX6210/EX7210; For EPSON H428A/H428B/H429A/H431A/H432A/H433A/H433B/H435B/H435C/H436A/H518A/H534B; For EPSON MG-50/MG-850HD; For EPSON PowerLite 1221/1261W/S11/S12/W16/W16SK/X12/X14+/X15; For EPSON PowerLite HC 500/HC 600/HC 707/HC 710HD/HC 750HD; For EPSON VS210/VS220/VS310/VS315W/VS320/W11+/W12+/X14+.

We also offer you simple installation guide in our product detailed description. We always be here to assist you when you got any problems.

1 Turn off the projector and disconnect the power cord.
2 Let the projector cool for at least 30 minutes.
3 Use a screwdriver to remove the screw from the cover.
4 Remove the cover and the lamp protection film.
5 Loose the screws of the lamp.
6 Pull our the lamp module by lifting the handle.
7 Replace the new lamp, then tighten back the screws.
8 Reinstall the lamp cover and reset the lamp usage time.

Note:

After replacing the new lamp for your projector, please remember to reset the lamp timer.

loutocloutoc

loutocloutoc

loutocloutoc

How To Determine If You Need To Replace The Bulb:

1.It is well known that the light bulb is a consumable item and has a life limit, so when the projector prompts that the lamp needs to be replaced, it will prove that the bulb needs to be replaced after the bulb has reached the end of its life.

2.If the projector suddenly stops working, firstly check the machine LED indicator to make sure the malfunction. Normally, the lamp power supply, the fan heat dissipation, and the lamp failure. If the lamp is not working, you need to replace it with a new one. If other problems, you do not need to change the lights, please send the machine to the repair center for inspection and maintenance.

Pictures And Screen Color Difference:

The projection screen appears yellowish, bluish, greenish, etc. Generally, the projector LCD or signal line is aging, the projector signal board is faulty or the connector cable is not in good connected. You can check the patch cord or replace the connector. Not the problem from your bulb.

The Picture Has Snowflakes (Black, White Dots):

Projection screen appears white snow, this fault is caused by the damage of the projector DMD, regardless of the bulb. Please send the machine to the repair center to repair and replace the corresponding accessories.

Insufficient Brightness:

The projection brightness is not only related to the bulb, it is related to the machine configuration, optical path components and the lens is aging or not. To exclude the problem of the bulb. The specific test method is to compare the new bulb with the old bulb. If it is our light bulb problem, please write to us to replace the new light bulb.

No Signal When Projection:

There is no signal after installing the new lamp. Please check the signal cable connection and the lamp cover are installed correctly. If there is no signal after checked everything was under great , then the machine hardware is in unworkable status. Please send the machine to the repair center for maintenance.

Unclear pictures:

If the overall blur of the projection screen due to insufficient brightness is generally a bulb problem, please write to us for replacement. If the part of the picture or the projection font is blurred, it is a machine problem. Try to adjust the lens. If there is no effect, please send the machine for maintenance.

Lower Projection Brightness / Blur:

Firstly please check whether it is related to the bulb. Test method: Compare the new bulb with the old one. If the same problem occurs with both old and new bulbs, it is likely to be caused by the aging of the projector optics, such as the projector lens, the aging of the optical components in the optical path, dust, etc.

Auto Power Off Or Flickering Off:

The new lamp is installed normally, the machine will still shut down automatically. Please check if the bulb is installed in the correct position. If there is no problem with the installation, please restart your projector to have a check. Check the machine fault indicator to determine the fault status. Normally, the lamp power supply, heat dissipation, lamp failure, if the new lamp fails, please replace your old lamp. If the old lamp does not malfunction, please write to us to replace the lamp. Otherwise, if the old lamp will have the same problem, please check the machine.

In the case of a DLP based projector, the screen flickers or continues to change color after power-on, eventually causing the projector to have a color wheel failure that is independent of the light bulb.

Beeps When Projection:

As the projector is used more often, the parts in the machine will slowly become aging, and some processing functions will be significantly reduced. If the projector beeps came up with after you replaced the new lamp, please try to adjust the fan operation mode to high altitude mode. Most of the problem will be solved after changing this setting.

Not Working After New Bulb Installed:

Please check if the product you received is in good condition, because it does not rule out that the logistics damages the product during transportation and the bulb is damaged.

Regular maintenance of the projector that requires a replacement lamp is necessary. Make sure all components are functioning properly (such as fans, power supplies, ballasts, etc.) and that there is no dust. If the component does not work properly, the lamp will not work properly. If it is determined that all components are working properly, but the bulb does not work, it means the product is defective. Please write to us to replace the new lamp.

Overheating:

Any new light bulb will generate the right amount of heat on the old bulb. This is normal. If the lamp gets too hot and your projector doesn’t work, you need to overhaul your projector. This is usually caused by an abnormality in the machine’s temperature control circuit. The solution can be sent to a company that specializes in repairing the projector. Overhaul.

▶For EPSON EB-S02/EB-S02H/EH-TW480/EB-X12/EB-X11/EB-X02/EB-S01/EB-S100/EB-S11/EB-S110/EB-S11H/EB-S12/EB-SXW11/EB-SXW12/EB-W01/EB-W02/EB-W110/EB-W12/EB-W16/EB-W16SK/EB-X11H/EB-X14/EB-X14H/EB-X15/EH-TW510/EH-TW550; For EPSON EX3210/EX3212/EX5210/EX6210/EX7210;
▶Model: V13H010L67. Perfect for EPSON H428A/H428B/H429A/H431A/H432A/H433A/H433B/H435B/H435C/H436A/H518A/H534B; For EPSON MG-50/MG-850HD; For EPSON PowerLite 1221/1261W/S11/S12/W16/W16SK/X12/X14+/X15; For EPSON PowerLite HC 500/HC 600/HC 707/HC 710HD/HC 750HD; For EPSON VS210/VS220/VS310/VS315W/VS320/W11+/W12+/X14+.
▶100% new replacement projector lamp with same function as your original lamp.
▶2000+ lamp lifespan. All of our projector lamps have undergone strict quality tests regarding beam power, connections, voltages and running time.
▶180 days warranty. If you have any query, please kindly contact us for solution(return&refund) before you leave us a poor feedback.

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “LOUTOC Projector Lamp Bulb V13H010L67 for Epson ELPLP67 EX5210 EX7210 EX3210 EX3212 VS210 VS220 X12 W12 S12 PowerLite Home Cinema 500 707 710HD 750HD”

Your email address will not be published. Required fields are marked *

LOUTOC Projector Lamp Bulb V13H010L67 for Epson ELPLP67 EX5210 EX7210 EX3210 EX3212 VS210 VS220 X12 W12 S12 PowerLite Home Cinema 500 707 710HD 750HD

£81.99

Save Money Shopping
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0