(as of Feb 02,2021 08:07:11 UTC – Details)
Loutoc V13H010L54/V13H010L58 Projector Lamp for Epson ELPLP54/ELPLP58 PowerLite Home Cinema 705HD S7 W7 S8+ EX31 EX51 EX71 EX3200 EX5200 EX7200
1. New Generation a+ Lampwick Inside Bare Bulb Make It More Illustrious And Clear Enough With The Same Original Functioning.
2. This Is Replaced Bare Bulb With Housing, Screwdriver Could Help You Install It Easily.
1 Turn off the projector and disconnect the power cord.
2 Let the projector cool for at least 30 minutes.
3 Use a screwdriver to remove the screw from the cover.
4 Remove the cover and the lamp protection film.
5 Loose the screws of the lamp.
6 Pull our the lamp module by lifting the handle.
7 Replace the new lamp, then tighten back the screws.
8 Reinstall the lamp cover and reset the lamp usage time.
After replacing the new lamp for your projector, please remember to reset the lamp timer.
Part Number: For ELPLP54/V13H010L54
Compatible Models: Fit For EPSON PowerLite Home Cinema 705HD S7/W7/S8+; EPSON EX31/EX51/EX71/H309A/H328B; EB-S7/X7/S72/X72/S8/X8/S82/W7/W8/X8e; EPSON EH-TW450. EPSON EX2200/EX3200/EX5200/EX7200; EPSON PowerLite 1220/1260/S9/X9/S10+; EPSON VS200; EPSON EB-S10/S9/S92/W10/W9/X10/X9/X92. EPSON H367A/H368A/H369A/ H375A/H391A.
Extended Lamp Life
Energy Saving Up To 70% Under The Eco Mode, With a Lamp Life Of An Impressive 4500 Hours, You’ll Get Extended Viewing And Lower Cost Of Ownership. In Fact, Even If You Watch a Three-Hour Movie Every Day, Your Projector’s Lamp Should Last Over 3 Years And You Can Be Sure That You Will Enjoy Your Home Entertainment For Many Years.
New Generation A+ Lampwick Adopted Inside The Bare Bulb, This Feature Gives More Depth To The Image Without Problems By Adjusting The Lamp Output, Based On The Brightness Information Of Each Frame. Bright Scenes Appear Crisp And Clear, While Dark Scenes Remain Detailed With Deep Blacks And Shadowy Detail, Which Makes It Be Possible To Output a Higher Definition Pictures Without Inflicting The No Harms As Tvs And Laptops Did.
Whether It’s Movies, Tv Shows Or Video Games, (Loutoc) Lamps Deliver Stunningly Rich Colors In Any Environment And For Any Content. Perfect For Home Entertainment But Also Ideal For Business And Education.
How To Determine If You Need To Replace The Bulb:
1.It is well known that the light bulb is a consumable item and has a life limit, so when the projector prompts that the lamp needs to be replaced, it will prove that the bulb needs to be replaced after the bulb has reached the end of its life.
2.If the projector suddenly stops working, firstly check the machine LED indicator to make sure the malfunction. Normally, the lamp power supply, the fan heat dissipation, and the lamp failure. If the lamp is not working, you need to replace it with a new one. If other problems, you do not need to change the lights, please send the machine to the repair center for inspection and maintenance.
Pictures And Screen Color Difference:
The projection screen appears yellowish, bluish, greenish, etc. Generally, the projector LCD or signal line is aging, the projector signal board is faulty or the connector cable is not in good connected. You can check the patch cord or replace the connector. Not the problem from your bulb.
The Picture Has Snowflakes (Black, White Dots):
Projection screen appears white snow, this fault is caused by the damage of the projector DMD, regardless of the bulb. Please send the machine to the repair center to repair and replace the corresponding accessories.
The projection brightness is not only related to the bulb, it is related to the machine configuration, optical path components and the lens is aging or not. To exclude the problem of the bulb. The specific test method is to compare the new bulb with the old bulb. If it is our light bulb problem, please write to us to replace the new light bulb.
No Signal When Projection:
There is no signal after installing the new lamp. Please check the signal cable connection and the lamp cover are installed correctly. If there is no signal after checked everything was under great , then the machine hardware is in unworkable status. Please send the machine to the repair center for maintenance.
If the overall blur of the projection screen due to insufficient brightness is generally a bulb problem, please write to us for replacement. If the part of the picture or the projection font is blurred, it is a machine problem. Try to adjust the lens. If there is no effect, please send the machine for maintenance.
Lower Projection Brightness / Blur:
Firstly please check whether it is related to the bulb. Test method: Compare the new bulb with the old one. If the same problem occurs with both old and new bulbs, it is likely to be caused by the aging of the projector optics, such as the projector lens, the aging of the optical components in the optical path, dust, etc.
Auto Power Off Or Flickering Off:
The new lamp is installed normally, the machine will still shut down automatically. Please check if the bulb is installed in the correct position. If there is no problem with the installation, please restart your projector to have a check. Check the machine fault indicator to determine the fault status. Normally, the lamp power supply, heat dissipation, lamp failure, if the new lamp fails, please replace your old lamp. If the old lamp does not malfunction, please write to us to replace the lamp. Otherwise, if the old lamp will have the same problem, please check the machine.
In the case of a DLP based projector, the screen flickers or continues to change color after power-on, eventually causing the projector to have a color wheel failure that is independent of the light bulb.
Beeps When Projection:
As the projector is used more often, the parts in the machine will slowly become aging, and some processing functions will be significantly reduced. If the projector beeps came up with after you replaced the new lamp, please try to adjust the fan operation mode to high altitude mode. Most of the problem will be solved after changing this setting.
Not Working After New Bulb Installed:
Please check if the product you received is in good condition, because it does not rule out that the logistics damages the product during transportation and the bulb is damaged.
Regular maintenance of the projector that requires a replacement lamp is necessary. Make sure all components are functioning properly (such as fans, power supplies, ballasts, etc.) and that there is no dust. If the component does not work properly, the lamp will not work properly. If it is determined that all components are working properly, but the bulb does not work, it means the product is defective. Please write to us to replace the new lamp.
Any new light bulb will generate the right amount of heat on the old bulb. This is normal. If the lamp gets too hot and your projector doesn’t work, you need to overhaul your projector. This is usually caused by an abnormality in the machine’s temperature control circuit. The solution can be sent to a company that specializes in repairing the projector. Overhaul.
▶Part Number: For ELPLP54/V13H010L54, Loutoc V13H010L54/V13H010L58 Projector Lamp for Epson ELPLP54/ELPLP58 PowerLite Home Cinema 705HD S7 W7 S8+ EX31 EX51 EX71 EX3200 EX5200 EX7200.
▶Models: Fit For EPSON EB-S7 EB-S72 EB-S8 EB-S82 EB-W7 EB-W8 EB-X7 EB-X72 EB-X8 EB-X8e EH-TW450 EX31 EX51 EX71 H309A H309C H310C H311B H311C H312A H312B H312C H327A H327C H328A H328B H328C H331A H331B H331C; For EPSON PowerLite 79/ HC 705HD/S7/S8+/W7;EB-S10 EB-S9 EB-S92 EB-W10 EB-W9 EB-X10 EB-X9 EB-X92 EX3200 EX5200 EX7200 H367A H367B H367C H368A H368C H369A H374B H375A H375B H376B H391A VS200; For EPSON PowerLite 1220/1260/S10+/S9/X9.
▶New Generation A+ Lampwick Inside Bare Bulb Make It More Illustrious And Clear Enough With The Same Original Functioning;
▶180 Days Warranty 2500 Hours Life;
▶Testing Before Delivery, Excellent Return Service With No Condition Within 12 Hours Feedback.